Delmhorst-instrument C-2000 Bedienungsanleitung

C-2000v2.0, 2.1owner’s manualC-2000 manual_2013-Revs_FX-2000 owners manual 1/25/13 11:17 AM Page 2

Testing Baled CottonhAttach the #30-E/C Electrode to the connector on top ofthe meter.hSlide the plastic spacer over the #491 contact pins fromthe bot

Temperature CorrectionThe basic calibration assumes the cotton temperature to be70°F. For best accuracy, apply a temperature correction ifthe cotton t

10SERVICE FOR YOUR METERIf your meter is not working properly, replace the batterywith a new one and check the calibration. If this does notresolve th

WARRANTYDelmhorst Instrument Co., referred to hereafter asDelmhorst, guarantees its C-2000 meter for one year fromdate of purchase and any optional el

NOTESC-2000 manual_2013-Revs_FX-2000 owners manual 1/25/13 11:17 AM Page 15

NOTESC-2000 manual_2013-Revs_FX-2000 owners manual 1/25/13 11:17 AM Page 16

51 Indian Lane EastTowaco, NJ 07082(877)-DELMHORST(335-6467)[email protected]©1999, Delmhorst Instrument Co.510INS-0012 REV. 01/13WH

C-2000 manual_2013-Revs_FX-2000 owners manual 1/25/13 11:17 AM Page 3

TABLE OF CONTENTS2 C-2000 Features3 Key Functions3 Check Calibration4 Set the Scale 4 To Change the Set-Point5 Information About Your Readings5

C-2000 FEATUREShDesigned primarily to check the moisture content (%MC)in lint cotton and seed cotton. Versions 2.0 and higherinclude scales for viscos

KEY FUNCTIONS! Read:Reads the %MC value.@ Check:Checks the meter calibration. Displays theaverage of up to 100 accumulated readings;displays the highe

A hard Reset is required if, after changing the battery, thedisplay is frozen. This is sometimes caused by the interrup-tion of contact between the ba

5INFORMATION ABOUT YOURREADINGSThe meter will accumulate up to 100 readings. After all 100readings are “stored” it will not add new readings until the

hTo keep the accumulated readings in memory release the cal-ibration check key @ before the total cycle time is complete. hTo erase readings, hold the

Readings below 6% seed cotton will be displayed as a nega-tive number. Readings above 20% seed cotton will be dis-played as a flashing “20.0%”. Both t